Install lever (12) to End panel (3) with 8 pcs Screws (E4)
Part E4 x 8 Part 1 2 x 1
Install 2 Support panels (8) to Bottom panel (7) with 16 pcs Screws (E4)
and reinforce with 4 sets of Corner brackets (S1) (S1 has equipped
with self-tapping screws with no drilling holes)
Part E4 x 16 Part S1 x 4
Attach 2 Brace panels (5) to Middle panel (6) and lock with
4 pcs Cam locks (C)
Part C x 4
Install 2 Between panels (4) to the middle of Solid panel (6)
and Solid panel (7), then lock with 8 pcs Cam locks (C)
Part C x 8
Integrate End panel (2), (3) and the table legs with the main body,
then secure with 20 pcs Cam locks (C)
Part C x 20
16
17
18
19
TIPS
1
2
3
4
Stick 40 pcs Cam covers (P) on
Cam locks (C) and stick 6 pcs
(M1) to the corresponding places
shown in the figure.
Part M1 x 6
Part P x 40
Installation of
cam pin and
cam lock
Install the Top panel (1) to the lifters (11), (12) with 12 pcs
Screws (E4)
Part 1x 1 Part E4 x 12
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
