Notice:
1.50% Tighten before fixing all screws, Allen wrench is recommended instead of an
electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable.
3. Tightern up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly, please loosen all the other
screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all the screws, adjust it on a flat ground and
tighten up all screws again.
6. Note: If one or some screws are fully tightened during assembly, chances are the
others will not be aligned with holes. In addition, all the holes are designed to be
relatively larger to provide more space for the adjustment of the screws.
03
