G Keypad use instruction:
lifiting up
lifiting down
Step3:
Plug F(Power Cord), all set.
ASSEMBLY INSTRUCTION
WARNINGS
WARNINGS
System Initialization
F
G
Drive the desk to the desired height when
pressing and holding “↑” or “↓” button.
If the system doesn’t work normally when we
use it, we need reset the system, to make the
system be initialized.
Resetting procedure is as follows, press both
"↑” and "↓" button together for about 15s and
you can hear a beep. And then lifting columns
will go down to its lowest position when holding
the “↓” button, you will hear the beep for three
times, and the whole step finishes.
1
.
This product must meet the actual technical
parameters in use.
2
.
The system should be away from water and
corrosion resistant gas.
3.Prevent direct sunlight and avoid long time
sunlight exposure.
4.Do not put overweight on the desktop and
keyboard.
5
.
Please contact us if there is anything wrong
with the product.
