STEP 1
A. PLACE RIGHT ARM (A) UPSIDE DOWN ON A FLAT, PROTECTED
SURFACE.
B. ATTACH SEAT (D) TO RIGHT ARM (A) WITH FLAT WASHER (G)
AND SHORT BOLT (E) USING ALLEN WRENCH (H). DO NOT
TIGHTEN COMPLETELY.
C. ATTACH LEFT ARM (B) TO SEAT (D) WITH FLAT WASHER (G)
AND SHORT BOLT (E) USING ALLEN WRENCH (H). DO NOT
TIGHTEN COMPLETELY.
STEP 2
A. TURN SEAT ASSEMBLY TO UPRIGHT POSITION.
B. CONNECT BACK (C) TO RIGHT ARM (A) AND LEFT ARM (B)
WITH FLAT WASHER (G) AND LONG BOLT (F) AND SHORT
BOLT (E) USING ALLEN WRENCH (H) AS SHOW. DO NOT
TIGHTEN COMPLETELY.
STEP 3
A. TIGHTEN ALL BOLTS SECURELY USING ALLEN WRENCH (H).
B. RETAIN ALLEN WRENCH (H) FOR USE TO TIGHTEN BOLTS
PERIODICALLY AS NEEDED.
STEP 4
A. PUT CUSHION (J) ON THE SEAT, THEN PUT ON THE BACK
CUSHIONS (I).
Page 2/4
