02
03
OPERATION MANUAL
Please do not keep emergency keys in your safe!
Important Notes
1. Open the packing, you will find a user manual plastic bag included
2 emergency keys. Do not store emergency keys in the safe.
2. Read the manual carefully before you install the safe.
3. Make sure the safe location is selected carefully. lt must be away
from electrical, plumbing. duct work, etc.
4. If an incorrect code is entered 3 times, the system will "freeze" for
20 seconds.
5. Designed for moderate security. This safe is not fire rated.
Installation:
1. Choose a location where the safe will be convenient to use, but not
easily visible to intruders.
2. Measure the back of the safe for exact fit. Cut the hole in drywall
based on your measurement.
3. Install your wall safe through the cutout in wall so that the hinge
side of the safe is flush against the right hand stud and the front
flange is flat against the wall.
4. With the safe open, install the three screws(included in the
package)through the holes in the right hand side of the safe first.
Tighten the screws so the safe is flush to the right stud.
Open the safe after installing the batteries:
Change the code
A. With door open, locate the red button on the back of door near the
hinge. Press it, you will hear 2 beeps and see a yellow light on for
seconds.
B. Input a new code of 3 to 8 digits, then press button "B". The
storage of the new code will be confirmed by two beeps.
5. Install the three screws on left side of safe and tighten.
Preparation for use: This product is battery operated. Only use
1.5V AA batteries. To install the batteries, just remove the battery
cover plate at the back of the door and install the four batteries.
Ensure the + and - positions are correct.
