06
07
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the
finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot
the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture as it
ages.
Further advice about wood
furniture care
STEP 3
Install the bed slat (D) to Side Rail (E) & (F), and tighten with Screws (5)
as shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION
FOR THE BED TO OBTAIN PERFECT STABILITY.)
Repeat Step 3 for other set of slats assembly.
Push the Side Rail (E) & (F) to meet with wooden slat (D) and fix the
Screw (5) by using the Screw Driver.
NOTE:
TIGHTEN SCREWS PERIODCALLY AS SCREWS WILL
BECOME LOOSE WITH USE. CHECK TIGHTNESS OF ALL SCREW
EVERY 6-8 WEEKS.
24x
STEP 3.1 :
E
5
D
