06
07
Periodically inspect and test the locking mechanism for proper
function. Add proper silicone oil for lubricating if necessary.
Periodically check out the base slots and keep clean, and make sure all
weight plates can be put in smoothly.
Never attempt to force the adjustment handle grip to rotate the
dumbbell that has been removed from the dumbbell base.
Never allow the dumbbells to drop freely to the ground. Damage to the
product and potential personal injury may occur.
Never allow dumbbells to forcefully bump together during use.
Damage to the product and potential personal injury may occur.
Never attempt to disassemble your Adjustable Dumbbell handle, or
base assembly-the product is not designed to be user serviced.
Do not rotate the handle grip to adjust weight if you haven’t
pulled out two pin boxes, or will cause damage to pin boxes.
Do not push back two pin boxes if the weight number hasn't aligned
to instructed area when adjusting weight, or will cause damage to
pin boxes.
Do not put back the handle if the weight number hasn't aligned to
instructed area when adjusting weight, or will cause damage to pin
boxes.
Do not lift the handle if you haven't pushed back two pin boxes, or
all weight plates will be lifted. The weight plates might fall off if you
pushed back after lifting the handle. This may result in injury or even
death.
Do not pull out the two pin boxes and rotate handle grip after you lift
the handle with weight plates, the weight plates might fall off if you
pushed back the two pin boxes. This may result in injury or even
death.
If you pulled out pin boxes
and rotated hand grip
accidentally, but haven’t
pushed back pin boxes, stop
using immediately.
Solution: Put the handle with
plates on the ground, adjust
the handle to minimum 2kg
(4.4lbs) weight, and push
back the two pin boxes, then
select weight plates under
the handle. And then put the
weight plates back to base to
continue use.
Do not put the handle
back in to the base
without weights unless it
is set to the minimum 2kg
(4.4lbs). Otherwise this
will cause damage to the
pin boxes.
Solution : Adjust the
handle to the minimum
2kg (4.4lbs) weight and
push back the pin boxes.
The handle can then be
put back in the base.
4
WARNINGS
