BLENDER CLEANING AND MAINTENANCE
Always clean the blender after each use for hygiene purposes and
to ensure its longevity.
Leaving food in the blender is a health risk as bacteria can grow. It
can also cause the blending jar to stain. Bacteria and residual food
acids can also damage the seals and shaft of the blades.
TO CLEAN THE BASE:
1. Switch off and unplug the blender from the power outlet.
2. Using a soft, damp cloth, wipe the surface of the blender's base.
You can use a mild detergent to remove dried food if required.
Never immerse the motor base in water or other liquids.
3. Use a dry soft cloth to thoroughly dry the blender.
TO CLEAN THE BLENDING JAR:
1. After each use, rinse the blending jar thoroughly with warm soapy
water (not hot).
2. Place one or two drops of dish soap in the jar and fill it halfway
with warm water.
3. Secure the lid and mount on the base.
4. Start the blender at LOW and slowly increase to level 5 speed.
5. Run on level 5 for 10-60 seconds (depending on what was
blended; thick contents take longer to clean).
6. Pour the contents out and rinse thoroughly.
7. Turn the blending jar upside down and let air dry.
Remember: The blending jar, blade assembly and lid assembly are
all dishwasher safe (place on the top shelf of the dishwasher only).
09
