13
Handle position
Handle position
Handle position
Handle position
Drain hose must be installed before unit starts working.
When unit is operating in cooling mode, to ensure enough water to recycle in the unit to cool condenser and
enhance cooling performance, so it is not suggested to use continuous drainage
Put the drain hose in an inaccessible place, not higher than drainage hole and keep drain hose straight
without any flexure.
Keep the drain cover and its stopper properly installed when continuous drainage is adopted.
IX.
Maintenance and Service
Turn off the unit and pull out the plug before maintain or send the unit to service center.
1. Surface cleaning
Clean the unit surface with wet and soft cloth, but do not use chemical solvents such as alcohol and gasoline to
avoid any damage to unit.
2. Filter cleaning
Clean the filter every two weeks, otherwise it would influence the unit performance if filter clogged with dust.
2.1 How to clean filter
Grip the filter handle and take it out gently in correct direction shown by the arrow.
Take out filters of back panel at first then side panel.
Clean the filters gently in warm water (about 40
℃
(
104
℉)
) mixed with detergent, and dry in the shade
Use even force to take out the filter to avoid any twist or damage to filter.
Notes:
Do not squash the mesh.
Do not hit the mesh with sharp objects or brush.
Drainage pipe
Cover Connector
Water Outlet
Drain Cover
Water stopper
