Costway EP23757, Manual

Page: 7 / 8

REMOTE CONTROL
PART NAME
Temp Up Button
2 Heater Mode Button
3 Temp Down Button
4
P口we「Button
5 Ambient/Lock Button
6
Timer Button
DESCRIPTION
Inc「eases the set temperature value
Toggles between Hi
I
Low/ Eco Modes
Dec「eases the set temperature value
Powe陌the heater on o「0忏
Shows ambient temp/hold to engage o「 disengage safety lock
function
Engages the on/off time『
FREQUENTLY ASKED QUESTIONS
。.
The temperature on my heater does not match the temperature display on my wall, or external
thermostat.啪”tly?
A. This is c口mpletely no「mal. The temperature display 口n you「heate「 may vary from the temperature
display on another thermostat [like the one mounted to your wall or a pu
『chased external the「mostat).
This is because the temperature sensor on the heate「 reads the temperature directly around the heater.
With the heate「 nea「the c口ld flo口r [and heat rising). any readings on elevated o「 external the「『TIOStats
will differ in readings on the heate 「. The best way to ope「ate you「 heater is to set the unit on High and dial
up to a temperature that feels comfo「table to you. Then, leave it at that temperature，陀gardless of the
mismatch. The heate「will cycle 口ff when the set temperature is met 口「exceeded slightly.
。.
Can I use more ttlan one heater at a time? Can I use the heater and another appliance at the国me
time?
A. Yes, but make su陀they a re not plugged into the same circuit. Each heate
「 requires its own minimum 15-
amp circuit with no othe
「 items plugged into that circuit or outlet. This is because heaters are consider
百
d
appliances and draw 口ut high amperage. If you are unsure your ciπuit meets these req1」irements, verify
with a ce「tified elect「ician.
A
WARNING: Risk of fire, damage to prope句．。「 injury may result if 「equirements are not met.
。
.Why do眉my heater's fan continue to run after the set temperature is reached or the power is turned off?
A. This is no「『nal. The heater
’
s fan will continue t口 「un even afte「the heater automatically cycles d口W『1.
The fan continues to run so that eve『γlast bit of heat is blown out of the heat chamber while allowing the
unit to continue filte
「ing you「 air. Once the internal box/components cool completely, the fan should then
shut o付。n its 口wn. In this case, allow a few minutes afte「 the heat cycles off [with p口，we「 口n]. The fan will
shut off faster when the power is turned off.
。.
My heater's display shows my ambient temperature to be in the 2Ds when I know it is warmer than
that. Why?
A. The heate 「
’
s displa� is defaulted to read the temperatu
陀
as Fahrenheit. If you
「 heater is definitely
heating but shows it is in the 20s you probably have the setting to read your temperature in Celsius rathe
「
than Fah「enheit.
。.
My heater's power cord ge恒warm. My cord is showing signs of heat or melting at the outlet. Is this
normal?
A.A wa「m power co「d is no「mal. These p口，we「 cords are rated safe fo「up to 105 。 C/ 221 ° F by the UL, CSA,
O「Ell. The exception is, if you detect heat, smoke，。「 signs of melting at the contact point of the wall
outlet, it may be due to loose or w口「n wall contacts [or arcing). Please stop using the heate「 immediately,
C口ntact wa「ranty supp_ort fo「 a replacement powe「 cord, and have a ce「tified electrician replace the wall
outlet as soon as possible.