background image

Page 3

 

 

Never locate the heater where it may fall into a bath tub or other body of water. 

14. Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or the like. 

Arrange the cord away from traffic areas and where it will not be tripped over. 

15. Do not use on soft surfaces, like a bed, where openings may became blocked. Do not place the 

heater near a bed because objects such as pillows or blankets can fall off the bed and be ignited by 

the heater. 

16. Do not operate any heater with a damaged cord, damaged plug, after the heater malfunctions, or 

if it has been dropped or damaged in any manner. Return the heater to an authorized service facility 

for examination, electrical or mechanical adjustment, or repair. 

17.  Do  not  insert  or  allow  foreign  objects  to  enter  any  ventilation  or  exhaust  opening  as  this  may 

cause an electric shock or exhaust opening as this may causes  an electric shock, fire, or damage 

the heater. 

18. This  heater  is  hot  when  in use.  To  avoid  burns,  do  not let  bare  skin touch  the  hot surfaces.  If 

provided, use handles when moving this heater. 

19.  Use  this  heater  only  as  described  in  this  manual.  Any  other  uses  not  recommended  by  the 

manufacturer may cause fire, electric shock, or personal injury and may void the warranty. 

20. Always plug heaters  directly into a  wall outlet/receptacle. Never use  with an extension cord or 

relocatable power tap (outlet/power strip) 

21. Do not use outdoors. 

22. To disconnect heater, turn controls to off, then remove plug from outlet. 

23.  Never  clean  this  heater  while  it  is  plugged  in.  Do  not  immerse  it  in  water.  To  disconnect,  turn 

control  to  OFF,  then  remove  the  plug  from  the  outlet  by  grasping  it  and  pulling  it  from  the  outlet. 

Never yank on the cord. 

24.  This  appliance  is  not  intended  for  use  by  persons  (including  children)  with  reduced  physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 

supervision or instructions by a person responsible for their safety. 

25. Children should be supervised to ensure that they do not play with the appliance. 

26. The heater must not be located immediately below a socket-outlet. 

27.  This  heater  is  filled  with  a  precise  quantity  of  special  oil.  Repairs  requiring  opening  of  the  oil 

container are only to be made by the manufacturer or his service agent, who should be contacted if 

there is an oil leak.   

 

 

 

Summary of Contents for EP22916











Reviews: