2. After buckling the table top left and right, tighten it with
4 self-tapping screws(M5*15), and then put the lower seat foot
(Undistinguished number).
3. Place the desktop fixing frame on the bottom of the desktop board,
and then tighten it on the lower seat foot with 4 bolts(M6*25) , then
put 4 support tubes on the connection between the fixing frame
and the desktop, and then use 4 self-tapping screws(M5*15)to tighten
the fixing frame and at the connection point of the table top board,
and then support the desktop.
4.Connect the seat and the desktop board according to the corresponding
number, press the middle part of the seat to click into the desktop,
then install the dinner plate, and the dining chair is installed.
05
