Costway BB0487, User Manual

Page: 4 / 4

Foot
Side Rail
Assembly
Lift the top of the foot to fit the peg into the hole in the side rail.
Hint:
Each foot is designed to fit the side rails one way.
If a foot does not seem to fit, remove it and assemble it to
the other side rail.
Repeat this procedure to assemble the other foot to the
other side rail.
Slide the socket on a foot onto the tapered end of a side rail.
Position each side rail so that the button faces outward.
While pressing the tabs on the ends of the seat back tube,
insert it into the sockets in each side rail,
until the tabs
“Snap”
into place.
Make sure you hear a “snap” on each side.
Pull the seat back tube up to be
sure it is secure in the side rail
sockets.
Seat Back Tube
Side Rail Sockets
Button
Press Tabs
IMPORTANT!
Before assembly and each
use. inspect this product for damaged
hardware, loose joints, missing parts or
sharp edges.
DO NOT ues if any parts are missing or
broken.
M5x32 mm screw-2 M5x50 mm screw-2
M5x42 mm screw-2 M5 locknuts-2
04
Insert the ends of the kickstand into the socket in each foot.
Kickstand
Vibrations Unit
Cr oss Brace
.
Fit the cross brace between the side rails, as shown.
Hint:
The cross brace is designed to fit one way.
If it does not seem to fit, turn it around and try again.
Lift
Press Button
UPRIGHT
Press Button
RECLINE
Lower
Seat Position
Upright:
While pressing the button on each side rail,
lift the seat back.
Recline:
While pressing the button on each side rail,
lower the seat back.
Buckle up the back of the pad and the stull.
Make sure you hear a clatter.
pocket
05
With the vibrations unit facing forward, fit the notches on
the unit onto the side rails, as shown.
M5x42 mm screw-2
M5 locknuts-2
M5x32 mm screw-2
M5 locknuts-2
M5x50 mm screw-2
M5 locknuts-2