9
B 242 - XTE 602 Eng. C1
22.11.10 AM
REV. 02
We reserve the right to make changes witout notice
COSTER
14.
2
7-day programmes
Enter the number of programmes you wish to use (max. 2)
In each 7-day programme you can assign to each day of the week one of following programmes :
– 24HOUR 1 …25;
– NORMAL 1...5;
– SETBACK 1 - 2;
– FLOW 1 - 2;
– FROSTPROT ;
– OFF.
14.
3
Holiday periods
These establish, for each zone, an operating programme, the same for all holiday periods, which
overrides the programme in use. At the end of each holiday period the controller returns to normal
operation.
To reduce the number of display pages dedicated to entering the dates, enter the number of holiday
periods or of bank holidays you wish to use (max. 25).
If left at 0 the programming pages do not appear.
Choose the programme to be used during all the holiday periods.
– 7DAY 1 - 2; – 24HOUR 1 …25; – NORMAL 1 ... 5; – SETBACK 1 - 2;
– FLOW 1 - 2; – FROSTPROT ; – OFF.
Enter the dates for each single holiday period and assign it to each zone concerned
• Hol. 01 = choice of periods made available by
• Htg : – NO = unused holiday period
– 1
= holiday period used only by heating zone1
– 2
= holiday period used only by heating zone 2
– 1+2 = holiday period used by heating zones 1 & 2
• Fr - - . - - to - - . - - = day and month of start and end of holiday period
For a single day of holiday enter the same date for start and end.
To cancel the holiday period keep + and – keys pressed at the same time.
14.
4
Special period
Period in which, for each heating zone, an operating programme to meet particular requirements
is set which substitutes temporarily the one in use :
– 7DAY 1 - 2; – 24HOUR 1 …25; – NORMAL 1 ... 5; – SETBACK 1 - 2;
– FLOW 1 - 2; – FROSTPROT; – OFF.
• Fr - - . - - to - - . - - = day and month of start and end of special period.
14.
5
Extension period
The Extension period overrides all programmes and modes in use, causing the heating zones to
operate for the time and at the temperature set. To activate the Extension period, close the switch
c1
( for heating zone 1) or
c2
(for heating zone 2), for at least five seconds and then open it.
At the
expiry of the period set the controller will resume its automatic operation.
• Extension 21.0c = setting of desired ambient temp. during Extension period
• for hours : 3
= setting of duration of Extension period
To interrupt the Extension period before the duration set expires press
←
and
→
keys together.
14.
6
Heating season
Establishes the winter heating season for both heating zones.
Enter the day and month of start and end of heating season.
To cancel the period keep p and – keys at the same time.
14.
7
Summer time
The controller can automatically change the current time of day at the beginning and end of the
daylight saving period.
– AUT = The change from BST to GMT and
viceversa
is automatic.
– MAN = you can set date different from that of European Community
To cancel the period, press + and – keys simultaneously
21.
9
⇓
⇓
21.
15
7 d a y 1 M O N D AY
2 4H O U R 1
7 d a y 1 S U N D A Y
2 4H O U R 1
21.
8
H o w m a n y 7 d a y
P r o g r a m m e s ? 0
21.
16
H o w m a n y H o l i d a y
P e r i o d s ? 0
21.
17
H o l i d a y P r o g H t g 1
F R O S T P R O T 6 . 0 c
21.
19
H o l 0 1 H t g N O
F r - - . - - t o - - . - -
19.
7
H t g 1 : S p e c i a l P
2 4H O U R 1
19.
8
H t g 1 : S p e c i a l P
F r - - . - - t o - - . - -
21.
20
H e a t i n g S e a s o n
F r - - . - - t o - - . - -
20.
11
R e m o t e E x t 2 1 . 0 c
f o r h o u r s 3
21.
18
H o l i d a y P r o g H t g 2
F R O S T P R O T 6 . 0 c
H o w m a n y H o l i d a y
P e r i o d s ? 0
21.
16
19.
9
H t g 2 : S p e c i a l P
2 4H O U R 1
19.
10
H t g 2 : S p e c i a l P
F r - - . - - t o - - . - -
21.
21
S u m m e r T i m e A U T
F r 2 9 . 0 3 t o 2 6 . 1 0
