Align the mounting positions on the Chair Seat Panel (B) with the mounting
positions on the Right Arm (C) .
Insert the bolts from the mounting positions on the Right Arm (C) to the mounting
positions on Chair Seat Panel (B)
Put Flat Spring w Nuts(F) to the Blots(E), partially tighten all
bolts into position.
E
I
F
I
G
H
B
C
A
Turn the Chair rightside. Adjust the pre-installed Rubber Caps until the chair is
level with the ground , tighten all screws and bolts. Your Chair is ready for use.
Once all Bolts and Nuts are in postion, use one Spanner (I) to hold the Bolt, and
the other Spanner to turn lock the Nut.
Repeat the same steps to attach Backrest Panel(A) to Right Arm (C)
Put on the Nut caps(H) after lock the Nut.
DO NOT OVERTIGHTEN.
Repeat the same steps for the Left part.
4 of 5
Summary of Contents for TAHOE
Page 5: ...5 of 5 5 of 5 ...
