5.1. Insert one end of the Connector (G/H) into the Arched Beam (I1) and fix it with bolts (AA), insert
the other end of the the Connector (G/H) into the Arched Beam (J1) and fix it with bolts (AA), and
cover the Protective Cover (U), See Fig5.1-5.3.
5.2. Insert one end of the Connector (G) into the Arched Beam (J1) and fix it with bolts (AA), no need
to tighten it. Insert the other end of the Connector (G) into the Arched Beam (R), and fix it with bolts
(AA), and cover the Protective Cover ( U), See Fig5.4-5.6.
5.3. Insert one end of the Connector (G) into the Arched Beam (R) and fix it with bolts (AA) without
tightening, insert the other end of the Connector (G) into the Arched Beam (J2) with bolts (AA), then
cover the Protective cover (U), See Fig5.7-5.9.
5.4. Insert one end of the Connector (G/H) into the Arched Beam (J2) and fix it with bolts (AA), no
need to tighten it, insert the other end of the Connector (G/H) into the Arched Beam (I2), then cover
the Protective Cover (U), See Fig5.10-5.12.
Note: Be sure measurements diagonally across the overall frame are within 5mm of the same
distance after completing this step.
TIGHTEN BOLTS.
I1x1
Rx1
Gx6
Hx2
I2x1
J1x1
J2x1
Ux4
AAx36
I2
G
H
Fig5.9
Fig5.10
AA
AA
AA
J2
I2
U
J2
R
Fig5.11
5875mm
AA
AA
J2
I2
Fig5.12
AA
J2
I2
U
U
J2
I1
J1
R
13
