4.3 Browsing Video
To ensure the real-time video can be played properly, you must
perform the following operation when you log in the web for the first time:
Figure
4
-
3
Adding
a trusted site
Step 2
In
the Internet Explorer, choose
Tool
>
Internet Options
>
Security
>
Customer level
, and set
Download unsigned
ActiveX control
and
initialize and script ActiveX controls not
marked as safe for scripting under ActiveX controls and
plug-ins to Enable
, as shown in figure 4-4.
Step 3 Download and install the player control as prompted.
If the repair tips displayed when installing the control , please
ignore the prompt, and continue the installation, the login page is
displayed when the control is loaded.
Step
1
the Internet Explorer.
Choose Tools
>
Internet options
>
Security
>
Trusted sites
>
Sites
, in
the
display
dialog
box
,
click
Add
,
as
shown
in
figure
4
-
3
.
To browse a real-time video, click Live Video. The Live Video
page is displayed
in figure 4-5.
, as shown
4.4
Two-way
a
udio
Partial camera do
not
support two-way
a
udio
,
this section do not
apply.
Figure
4
-
5
Live
Video
Figure 4
-
4
Configuring ActiveX control and plug-in
Component
Hazardous Substance or Element
Plumbum
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr6+)
Polybromina-
ted Biphenyls
(PBB)
Structural
part
Board/
circuit
module
Cable
connector
Accessor-
ies
○
: indicates that the concentration of the hazardous substance in
all homogeneous substances of the component is within the
limit specified in SJ/T 11363-2006 Requirements for
Concentration Limits for Certain Hazardous Substances in
Electronic Information Products.
×
: indicates that the concentration of the hazardous substance in
at least one homogeneous substance of the component
exceeds the limit specified in SJ/T 11363-2006
Requirements for Concentration Limits for Certain
Hazardous Substances in Electronic Information Products.
×
×
×
×
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Step
5 Install the dome shell, the dome shell fixed base and the
compression ring on the mounting base, as shown in figure
3-3.
Stream
Camera
Live Video
Playback
Configuration
Polybrominated
Diphenyl Ethers
(PBDE)
NOTE
NOTE
NOTE
4.4.1
Camera PC
Connection
：
Step
1
Connect microphone to audio input interface
of camera.
Step
2
Connect speaker to the PC audio output interface
.
Step
3
Log in camera Web, click to turn on
.
4
.
4.2 PC
two-way
a
udio
Camera
Step1 Connect microphone to PC audio input interface.
Step2 Connect speaker to camera audio out interface.
Step3 Log in camera Web, click to turn on
two-way
a
udio
.
Step 6 Turn the main body, adjust the position so that the camera
faces the monitored area, then tighten the compression
ring and fix the camera, as shown in figure 3-4.
Figure 3-4
Adjusting camera
4.1
Login
Step
1
Open the Internet Explorer, enter the IP address of IP camera
(default value:
192.168.0.120）
in the address box, and press
Enter. The login page is displayed. as
figure
4-1
.
Step
2
Input the user name and password.
shown in
The default user name is admin. The default password is admin.
Change the password when you log in the system for first time to ensure
system security.
You can change the system display language on the login page.
NOTE
Step3
Click Login, the main page is displayed.
Device >
IP
address to log in the
4.2
Modify IP address
Choose
Configuration >
Local Network
, the
Local
Network
page is displayed.
Enter the IP address in the IP Address box and click
Apply
as shown
in figure 4-2.
After
the
success
of
the
IP
address setting, please use the new
Web interface.
Figure
4
-
2
Local
Network
User Name
Password
English
Figure
4
-
1
Login
Local Network
IP Protocol
DHCP
IP Address
Subnet Mask
Default Gateway
Preferred DNS Server
Alternate DNS Server
MTU(800-1500)
Refresh
Apply
70
Figure 3-1
of
Dimensions
mounting base
70
Outlet
F
igure
3
-
2
Cut the compression
ring outlet
Mounting base
Compression ring
Dome shell fixed base
Dome shell
F
igure
3
-
3
camera installation
Triaxial rotation
Foucs
Zoom
F
igure
３-
5
A
djusting view angle and focal length
NOTE
Adjust the position of the camera by triaxial rotation: rotating
horizontally, rotating up and down, and performing lens axial
rotation, and adjust the camera direction and lens alignment
target.
Step 7 Adjust view angle and focal length by using an adjusting
tool, as shown in figure 3-5.
Appendix
：
Hazardous Substance Declaration
5
Quick Configuration(e.g IE)
4
