Costar CDI2110IRF, Quick Manual

Page: 7 / 13

7
Plastic Dome Model
Cable hole
Center
Screw 1
Screw 3
Screw 2
Side cable
access hole
Cable hole
Screw 1
Screw 3
Screw 2
Guide Pattern
1
Use the screws provided with the camera to secure
the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screws.
2
Connect external devices, the network cable,
and the power adapter. If the camera is
vandal
dome model , block the cable access hole for
waterproofing by using the enclosed cable access
hole rubber when routing cables and wires.
Waterproofing sealing is required by using silicone
etc. after blocking the cable access hole. Ask your
retailer for details.
3
Adjust the angle of the lens. For more information,
refer to the
Angle Adjustment .
4
Adjust the focus and zoom levers.
5
Attach the shield case to the vertical rotation
adjustment screw and secure it in place.
IR LED non-supported model only
6
Attach the dome cover to the bottom cover.
–
Vandal dome model
: Use the provided screws
to secure the dome cover on to the bottom
cover.
– Plastic dome model : Align the marking next to
the cable access hole on the bottom cover and
the side cable access hole on the dome cover
together and then turn the dome cover in
clockwise direction to lock it in place.
7
Connect the power.
Angle Adjustment
2
3
1
1
Lens Rotation
2
Vertical Rotation
3 Horizontal Rotation
English