![background image](http://html1.mh-extra.com/html/costan/rossini/rossini_user-instructions_2670995022.webp)
21
cod. UM00010Q
1. DESCRIPTION
VIVALDI - ROSSINI are fan-assisted refrigerated showcases for the preservation of fresh foods. Their main features and their
dimensions are clearly illustrated in the drawings of pages 2, 3, 4 and 5. As for their weights, packing included and exclu-
ded and their packing sizes, see table I and drawings 4 and 5 on page 5. A wide range of optional accessories is also avai-
lable for enhanced functions. To this respect, contact the authorised after-sales service only.
2. TRANSPORTATION
The cabinet is contained in a specially crated package that enables transportation by the use of fork-lift trucks. Handle
the machine on its own pallet or on a similar platform; use a fork lift truck, either manual or electric, provided that it
is adequate for handling such appliances and it has
the requisite lifting capacity (see page 5 - figs. 4 and 5 and
table I). Handling is reserved for the authorised after-sales service.
3. DELIVERY AND STORAGE
Prior to accepting the case from the carrier, check the conditions of the package. If it is showing visible damage, the
machine too may have suffered some consequences. If so, unpack the machine in the presence of the carrier and sign,
with reservation, the delivery bill. The manufacturer disclaims all liability for damage caused by transportation or incor-
rect handling during storage.
Unpacking is reserved for the authorised after-sales service.
Storing temperature
must be between -25°C and +55°C, air humidity between 30% and 95%.
Keep the case away from direct sunlight
and from the elements.
4. INSTALLATION AND AMBIENT CONDITIONS
The cabinet must not be installed in premises containing explosive gas substances. It can neither be used
in the open nor exposed to the rain.
Prior to connecting the cabinet, make sure that the rating plate data
correspond to the characteristics of the exi-
sting electrical system
(see page 7 - fig. 9 tab. III)
. For correct operation, the machine must be placed on a
level
floor
(see page 6 - fig. 6),
far from sources of heat and/or direct sunlight, doors, windows, fans or ventilation
outlets (
see page 6 - fig. 7). It must be granted a reasonable
free front area
for customer service.
The room where the appliance is installed must comply with the requirements set forth on page 6, fig. 8 and tab.
II.
5. ELECTRICAL CONNECTION
IMPORTANT: AHEAD OF THE CABINET THERE MUST BE A MULTIPOLAR CUTOFF SWITCH WITH CON-
TACTS SPACING AT LEAST 3 mm AND WITH THE ADEQUATE CIRCUIT-BREAKING POWER (see fig. 19).
The position of the cutoff switch must enable its actuation in any EMERGENCY situation (maximum distance
3 m). Show the position of the cutoff switch to any prospective operator.
The refrigerator must be installed by professionally qualified personnel, in accordance with the instruc-
tions provided by the manufacturer and local regulations. Incorrect installation may cause harm to per-
sons, animals and property. The manufacturer assumes no responsibility for such damages.
The cord must be spread out safe from shocks, away from liquids, water or sources of heat and it must always be kept
in perfect condition. If it should be damaged, have it replaced by duly licensed personnel.
THE USE OF ADAPTOR
PLUGS IS FORBIDDEN.
ENGLISH