Cosori CO162-CWM, Manual

Page: 8 / 24

8
EN
OPERATION
1.
Place your coffee warmer on a
flat, level surface.
2. Connect the AC/DC adapter to
the DC in-port on the warmer.
Plug in the adapter.
3.
Press to turn on the warmer.
The display will flash the default
temperature (85°C/185°F), and
will begin to heat up.
4. ( Optional ) You can choose a
temperature using the and
buttons, from 25°C–110°C
(77°F–230°F). Once you have set
the temperature, the display will
flash 3 times and the warmer will
begin to heat up.
5.
( Optional ) To change
temperature units, press and hold
and at the same time for
3 seconds. The units will change
from “
°C
” to “
°F
”.
6. Place the coffee mug on the
heating surface.
7. Press to turn off your warmer
when you are finished.
Figure 1.1
NOTE:
• The temperature on the display shows
the temperature of the heating plate,
not the actual temperature of the
liquid in your cup.
• For best results, we recommend using
the Cosori Stainless Steel Coffee Mug.
You may also use another heat-safe
cup that is thin and has a flat bottom.
NOTE:
• Remember to take off the lid before
drinking from the Cosori mug. The
opening in the lid is not for drinking,
but for placing your stirring spoon.
Do
not drink from the lid.
[ Figure 1.1 ]
• Be cautious when drinking. If left on
the warmer for too long, the mug may
be too hot to drink from immediately
(varies based on warmer temperature).