7
BEFORE FIRST USE
Water Test
Perform the Water Test before using your
kettle to make sure it’s working properly.
Do
not
drink the water that is boiled during this
test.
1.
Remove all packaging from your kettle
and its accessories.
2.
Completely unravel the power cable
and place the power base on a flat,
level, stable surface.
3.
Fill the kettle with water to the “
MAX
”
line, then put the lid on the kettle.
[
Figure 1.1-1.2
]
4.
Press
BOIL BLACK
. Then, press
START/CANCEL
to begin heating.
5.
Turn off the kettle once it has finished
boiling the water. Allow it to cool, then
pour out the water. Rinse thoroughly
2–3 times with cold water.
Figure 1.1
Figure 1.2
