6
GETTING TO KNOW YOUR BLENDER (CONT.)
BEFORE FIRST USE
Setting Up
1.
Remove all packaging from your
blender.
2.
Fill the pitcher halfway with warm,
soapy water.
3.
Place the pitcher on the motor base.
Plug in.
4.
Turn the speed control knob to the
lowest setting. Use the
ON/OFF
switch
to start the blender, and let it run on the
lowest setting for 5-10 seconds.
NOTE:
There may be a faint odor when
using the blender for the first time. This is
normal.
5.
Slowly turn the speed control knob to
the highest setting and allow the blender
to run for 15 seconds.
6.
Turn off and unplug the blender.
Rinse all parts and allow them to dry
completely.
• Use the
ON/OFF
switch to start or stop
blending.
• Use the speed control knob to change
the blending speed.
NOTE:
The
PULSE
switch must be in the
neutral position for the speed control knob
to work.
• Hold the
PULSE
switch down to use
the pulse function. The blender will run
at the highest speed setting until you
release the
PULSE
switch.
Control Panel
Down -
Off
Left -
Low
Up -
On
Right -
High
Hold down to pulse
