COSMOGAS NOVADENS 24, User Manual

Page: 4 / 16

4
2 - GENERAL INFORMATION
2.1 - Introduction
Congratulations!
You have effectively purchased one
of the best products on the market.
Each single part is built, tested and
assembled, with pride, at the
COSMOGAS factories, thereby
guaranteeing optimum quality
control.
Thanks to on-going research
carried out by COSMOGAS, this
product has been conceived and is
considered to be the best in its
class with regards to respect for
the environment, since it falls within
class 5 (less polluting) envisaged
by technical norm EN 297 (and EN
483) and has an elevated efficiency,
4 stars as per EC Directive 92/42/
EEC. Great importance is also
given to the end of the appliance’s
useful life. All its components can
easily be separated into similar and
completely recyclable parts.
2.3 - Manufacturer
COSMOGAS srl
Via L. da Vinci 16
47014 - Meldola (FC) ITALY
Tel. +39 0543 498383
Fax. +39 0543 498393
www.cosmogas.com
info@cosmogas.com
2.4 - Key to symbols
used
General danger!
Failure to observe this warning may
compromise the smooth running of the
appliance or cause serious damage to
individuals, animals or property.
l
Operation symbol
F
Important indication symbol
2.5 - Warranty
See section 4
NOVADENS XXYYYY
“ “ = Boiler with exchanger sanitary to partial accumulation;
“A” = Boiler for only heating without integrated pump;
“B” = Boiler
which can be combined with BWR C series storage tank;
“C” = Boiler for only heating with integrated pump;
“P” = Boiler with exchanger secondary for D.H.W., to plates;
“0834” = Boiler
for low temperature central heating systems.
24 = Boiler with maximum input heat of 25 kW
34 = Boiler with maximum input heat of 34.8 kW
Gas-fired, condensing, hot water boiler, with sealed combustion chamber
and pre-mix burner, for heating and domestic hot water production.
2.2 - Description of
models