background image

2

  3

THANK YOU FOR YOUR PURCHASE

Thank  you  for  your  purchase.  We  know  that  you  have  many  brands  and
products to choose from and we are honored to know that you have decided
to take one of our products into your home and hope that you enjoy it.

COSMO appliances are designed according to the strictest safety and performance

standard  for  the  North  American  market.  We  follow  the  most  advanced

manufacturing philosophy. Each appliance leaves the factory after thorough

quality  inspection  and  testing.  Our  distributors  and  our  service  partners  are

ready to answer any questions you may have regarding how to install, use and

care for your products. We hope that this manual will help you learn to use the

product in the safest and most effective manner .

If you have any questions or concerns, please contact the dealer from whom you

purchased it, or  contact our Customer Support at:

1-888-784-3108.

TABLE OF CONTENTS

 SAFETY INSTRUCTIONS

 

4

 STAINLESS STEEL PERMANENT FILTERS   

 

       5

 INSTALLATION REQUIREMENTS 

                                      9

 PARTS INCLUDED                                       

                    10

 PRE-INSTALLATION REQUIREMENTS                                       11

 INSTALLATION INSTRUCTIONS                                          12-16

 CHARCOAL FILTERS INSTALLATIONS                                      17

 OPERATION INSTRUCTIONS                                               18-19

 FILTERS & CIRCUIT DIAGRAM                                                  20

 RANGE HOOD ASSEMBLY                                                        21

 BLOWER ASSEMBLY                                                                  22

ELECTRICAL ASSEMBLY                                                              23

MAINTENANCE                                                                          24

TROUBLESHOOTING                                                                25

WARRANTY & SERVICE                                                       26-27

 DIMENSIONS DIAGRAMS                                                       6-8

Summary of Contents for QB Series
















Reviews: