8
9
INSTALLATION REQUIREMENTS
BEFORE YOU BEGIN
Read these instructions completely and carefully.
●
IMPORTANT – Save these instructions for local inspector’s usage.
●
Note to installer – Be sure to leave these instructions with the Consumer.
●
Note to Consumer – Keep these instructions for future reference.
●
Skill Level – Installation of this vent hood requires basic mechanical and
electrical skills.
Proper installation is the responsibility of the installer.
CAUTION:
Due to the weight and size of these vent hoods and to reduce the
risk of personal injury or dam-age to the product, TWO PEOPLE
ARE REQUIRED FOR PROPER INSTALLATION.
Sufficient air is needed for proper combustion and exhausting of gases
through the chimney of fuel burning equipment to prevent back-
drafting.
Follow the cooking equipment manufacturers guideline and safety
standards such as those published by the National Fire Protection
Association (NFPA), the American Society for Heating, Refrigeration
and Air Conditioning Engineers (ASHRAE), and local code.
When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities. Ducted systems must always be
vented outdoors.
WARNING
:
To reduce the risk of the fire or electrical shock, do not use this range
hood with any external solid-state speed control device. Any such
alteration from original factory wiring could result in damage to the unit
and/or create an electrical safety hazard. TO REDUCE THE RISK OF
THE FIRE, USE ONLY METAL DUCTWORK. These vent hoods are
designed to be installed onto a wall or beneath a cabinet.
●
PARTS INCLUDED
Pencil
Tape
Safety Goggles
Phillips screwdriver
Flathead screwdriver
Drill
PARTS LIST
F
G
H
I
A)
Metal anchors (concrete installations) - 4 pcs
B)
Damper Flap - 1
C)
Plastic Anchors (drywall installations)- 10 pcs
D)
ST4*4x35 mm wood screws - 10 pcs
E)
ST4*4x12 mm metal screws - 6 pcs
F)
Metal Hinges - 2 pcs
G)
Beveled Washers - 10 pcs
H)
Remote Control - 1
I)
7.5 in. round duct - 1
J)
Metal Duct Clamp - 1
A
B
C
PARTS NEEDED
Measuring tape
Level
Safety Gloves
Hammer
J
