16
17
Cleaning and maintaining your microwave
Cleaning the outside of your microwave
Exterior
The outside surface is precoated steel and plastic. Clean the outside with mild soap and water, then rinse and dry
with a soft cloth. Do not use any type of household or abrasive cleaner.
Door
Wipe the window on both sides with a damp cloth to remove any spills or spatters. Metal parts will be easier to
maintain if wiped frequently with a damp cloth. Avoid the use of spray and other harsh cleaners as they may stain,
streak, or dull the door surface.
Control panel
If the control panel is dirty, open the microwave door before cleaning. Wipe the panel with a cloth dampened
slightly with water only. Dry with a soft cloth. Do not scrub or use any sort of chemical cleaners. Close the door and
press
STOP/CLEAR
to clear any buttons you may have pressed.
Cleaning the inside of your microwave
Interior
Wipe with a soft cloth and warm water. Do not use abrasive or harsh cleaners or scouring pads. For baked-on food,
use baking soda or a mild soap, then rinse thoroughly with hot water.
To help loosen baked-on food particles or liquids, heat two cups of water (add lemon juice if you want to keep your
microwave fresh smelling) in a four-cup measuring cup at high power for five minutes or until boiling. Let it cool in
the microwave, then wipe the interior with a soft cloth.
Waveguide cover
The waveguide cover is located on the right wall inside your microwave. Keep the waveguide cover clean to assure
good microwave performance. Carefully wipe with a damp cloth any food spatters from the surface of the cover
immediately after they occur. Built-up splashes may overheat and cause smoke or possibly catch fire. DO NOT
REMOVE THE WAVEGUIDE COVER.
Removing odors
Occasionally, a cooking odor may remain in the microwave. To remove, combine one cup water, lemon juice, and
several whole cloves in a two-cup glass measuring cup. Boil for several minutes at high power, then let it cool in the
microwave. Wipe the interior with a soft cloth.
Turntable and turntable support
Remove the turntable and turntable support and wash them in mild, sudsy water. For stubborn stains, use a mild
cleanser and non-abrasive scouring sponge. You can also wash them in the top rack of a dishwasher.
The turntable motor shaft is not sealed, so excess water or spills should be wiped up immediately.
Cleaning and replacing the filters
Cleaning the exhaust filters
The exhaust filters should be removed and cleaned about once a month.
CAUTION
Do not operate the oven hood without the filters properly in place.
1
To remove the exhaust filters, slide the filter toward the back of the microwave, then pull it downward while
sliding it out of the side slot. Repeat for the second filter.
2
Soak the ventilation filters in hot water using a mild detergent or wash in a dishwasher. Rinse well and shake to
dry.
3
To reinstall the exhaust filter, slide it into the side slot, then push up and toward the front of the microwave to
secure it. Repeat for the second filter.
Replacing the charcoal filter
The charcoal filter is used in nonvented, recirculated installations. The filter should be changed every 6 to 12 months
depending on use.
1
Unplug the microwave oven or turn off power at the main circuit breaker.
2
Remove the vent grill screws.
3
Pull the vent grill away from the unit.
CAUTION
Do not use ammonia. The aluminum on the filter will corrode and darken.
Surface lights
BOTTOM
Ventilation filters
BOTTOM
