Cosmo Ride from Cosmo Connected is a removable light that can be placed either on a helmet or on the seatpost.
It offers different lighting modes which adapt to the surrounding brightness, as well as turning indicator lights.
The brake light mode is also available when configured in "saddle" mode.
This device is your true safety compagnion: it allows you to better be seen and also enables you to detect any fall and warn
your emergency contacts (guardian angels) by text message after starting a ride in the mobile application.
BEFORE FIRST USE:
1.
Plug your Cosmo Ride using the provided micro-USB cable on a power supply. The micro-USB port is
located at the back of the device, behind the protective strip on the right side. The Cosmo Ride will turn
on. The recharge indicator (red light on the left side) stays on until fully charged).
.
Unplug the Cosmo Ride, you can now configure it.
2.
Download the
Cosmo Connected
application on the Apple Store or on the Google Play Store.
3.
Turn the Bluetooth and the geolocation of your smartphone on, make sure you have an internet connexion.
4.
Launch the application and follow the instructions to connect your Cosmo Ride and your remote control.
.
Once the installation is finalized, you can select your lighting mode with your remote control or with the
application (before starting).
IMPORTANT:
If you meet any difficulty during the installation or the use of the application: we advise you to check that
your Cosmo Ride or your remote control are not connected directly to the Bluetooth of your smartphone.
They won't be recognized by the application otherwise.
Summary of Contents for Cosmo Ride
Page 1: ...USER GUIDE WARRANTY...
