continued on next page
LATCH: Lower Anchor
+ Tether Install
48
47
1
Remove Lower Anchor Belt
from Storage Location
Or if the lower anchor belt was
used
Rear-Facing
, remove the belt
from the
Rear-Facing Belt Path
so
both hooks are on the same side of
the car seat as shown.
Do not use the lower anchors of the child restraint
anchorage system (LATCH system) to attach this child
restraint when restraining a child weighing more than
40 lbs (18 kg).
Before you begin installing the car seat
into your vehicle, did you check:
Your child’s weight and height?
22-40 lb
(10.1-18 kg)
and
29-45 in.
(73.6-114.3 cm)
Your child’s fi t?
See page 8.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
Route Lower Anchor Belt
Thread the hook through the
Forward-Facing Belt Path
opening
as shown. The adjuster can be on
either side of the car seat.
The belt goes
:
• across the car seat;
AND
• under the car seat pad;
AND
• out the other
Forward-Facing
Belt Path
opening.
Do not twist belt.
Finished Lower Anchor
Belt Routing
3
Locate
Forward-Facing
Belt Path
2
Adjuster
