Cosatto Wonder, Owner'S Manual

Page: 9 / 57

Care & Maintenance
Store your child restraint system in a dry, safe place.
Storing a damp child car seat base will encourage mildew to form, so after exposure to
damp conditions, dry off with a soft cloth and allow to dry thoroughly before storing.
Avoid leaving the child restraint system in sunlight for prolonged periods as this may
cause fabrics to fade.
Inspect the child restraint system regularly for signs of damage - stop using the
product if damage is found.
DO NOT take apart, or attempt to take apart the child restraint system when cleaning.
It is unnecessary and dangerous to do so.
Plastic and metal parts may be sponged clean with warm water and a mild detergent.
Refer to the wash care on soft goods for cleaning instruction.
Never clean with abrasive, ammonia based, bleach based or spirit type cleaners.
Fitting & Operation information
Child car seat (with vehicle belt)
Location
1
IMPORTANT: Never use the child restraint system on a seat where an
airbag is fitted and active. Refer to your vehicle user manual for
information on de-activating the airbag.
WARNING: Your child restraint system can only be installed rearward
facing using a three point lap and diagonal vehicle belt in the front or
rear passenger seats of the car.
Fitting
2
Position the child car seat to the vehicle seat, pass the vehicle waist belt through the
side vehicle belt guides (1) and fasten the vehicle buckle (2) .
Adjust the handle to “in car position”
11 12 (3)
.
Route the diagonal belt under handle hinge
(4)
then through rear vehicle seat belt
guide (5) .
Tension the diagonal belt
(6)
.