Cosatto Nitty Gritty, Instructions Manual

Page: 9 / 57

Unfasten straps on chassis (2).
Unfasten zip unit on the side of the hood (3).
Release the hood brackets from the chassis mounts (4).
23
Removing fabric
Backrest recline
24
Lowering
25
Raising
Adjusting handle position
26
There are 5 handle positions on each side.
Fitting of softgoods
27
Open the harness
10
and remove chest pad & crotch pad (1).
Push the harness straps through the footmuff & headhugger (2).
Attach the footmuff fabric fasteners to the rear of the backrest (3).
Refit chest pad & crotch pad then close the harness
11
.
Basket
28
Removing
Raincover
29
Fitting
Place the raincover over the travel system as shown.
Attach the fabric fasteners at the rear of the raincover (1).
Fasten the retaining straps around the chassis at the front (2).
Pushchair
30
Closing
Ensure backrest is in the reclined position
24
.
Press the releasing buttons on both sides of the hinge (1) (2).
Grasp the releasing strap at the centre of the seat (3) and pull upwards (4).
Release the releasing strap and close the chassis together until the auto lock engages (5).