ARF® MODEL
3.6
Use your radio to set the servo center position and install the large control horn onto the servo.
Assemble the control rod and ball links and adjust the control linkage for proper geometry.
When satisfied, screw the ball link to the servo arm and control horn. The servo arm should be
as close to perpendicular to the control rod as possible while the elevator is at neutral. Double
check all screws, bolts and nuts to assure proper installation and operation without binding.
4.
Rudder Assembly
4.1
Locate pull-pull linkage set for rudder.
4.2
Install the double-arm fiberglass control horns in the same way as you did the elevator and
aileron horns.
4.3
Connect CA hinges for rudder.
