- 6 -
NOTE:
Most of the listed hardware has been packaged separately, but some of them have
been preinstalled in the identified assembly parts. In this instance, simply remove and
reinstall the hardware as assembly is required.
Please refer the individual steps for the installation and pay attention to the preinstalled
hardware.
ASSEMBLY INSTRUCTION
NOTE:
It is well suggested that two or more people to assemble this machine to avoid any
possible injury.
Remove all the security tape and wrapping before the installation.
Step 1
1.
Pre-lock the Bottom horizontal frame (10) on the Seat frame (1) with Hex socket head cap
bolt (20), Flat washer (37), Nylon nut (32).
2.
Pre-lock the Bottom horizontal frame (10) on the Weight frame (2) with Hex socket head cap
bolt (16), Flat washer (37), Connecting board (14) and Nylon nut (32).
3.
Pre-lock the Upper connecting frame (3) on the Weight frame (2) with Hex socket head cap
bolt (17), Flat washer (37), Connecting board (14) and Nylon nut (32).
4.
Pre-lock the Upper connecting frame (3) on the Seat frame (1) with Hex socket head cap bolt
(20), Flat washer (37) and Nylon nut (32).
5.
Lock all the pre-locked bolts tightly now.
Summary of Contents for Omega TPP-10
Page 5: ... 4 Exploded Drawing ...
