Cortex Omega PLD-10, Owner'S Manual

Page: 12 / 13

- 11 -
Step 5
1. FRONT PULL DOWN : As shown in picture 1, first take out the Knob (23) from the Main
base frame (1), then insert the Adjustable Foam roll rod 2 (57) into the Main base frame (1)
and tighten the knob after adjusting the hole position, finally insert the Adjustable Foam roll
rod (5) into the Connective tube (58).
2.
REAR PULL DOWN
: As shown in picture 2, first take out the Knob (23) from the Main
base frame (1), then insert the Adjustable Foam roll rod (5) into the Main base frame (1)
and tighten the knob (23) after adjusting the hole position; finally insert the Adjustable Foam
roll rod 2 (57) into the Connective tube (58).
PICTURE 1 PICTURE 2