COR-ACC995-V2
V151027
8
7
6
5
4
3
2
1
8 7 6 5 4 3 2 1
7
6
5
4
3
2
1
2
1
4
3
2
1
3 2 1
P2
P3
P6
P5
P1
P4
P1
P2
P3
P4
P5
P6
A.
B.
1
2
Contents
2
User Guide
The communication wires and power line should NOT be bound in the same conduit or tubing.
Don’t equip reader and lock with the same power supply. The power for reader may be unstable when the lock is activating, that may make the
reader malfunction.
The standard installation: Door relay and lock use the same power supply, and reader use independent power supply.
Use AWG 22-24 Shielded Twist Pair to avoid star wiring ,CAT 5 cable for TCP/IP connection
1.Tubing:
2.Wire selection:
3.Power supply:
1
Products
3
Terminal Cables
4
Tools
Notice
Connector Table (1)
5
Optional
Wire Application
Wire
Color
Description
Lock Relay
1
Blue White (N.O.)DC24V1Amp
2
Purple White (N.C.)DC24V1Amp
Lock Relay COM
3
White
(COM)DC24V1Amp
Door Contact
4
Orange
Negative Trigger Input
Exit Switch
5
Purple
Negative Trigger Input
Alarm Relay
6
Gray
Transistor Output Max. 12V/100mA
(Open Collector Active Low)
Power
7
Thick Red DC 12V
8
Thick Black DC 0V
Cable:
P1
Wire Application
Wire
Color
Description
RS-485 for Lift
Controller
1
Thick Green RS-485(B-)
2
Thick Blue RS-485(A+)
Cable:
P4
Wire Application
Wire
Color
Description
1
---
---
2
---
---
TCP/IP Output
3
Orange White Net - TX+
4
Orange
Net - TX-
5
Green White Net - RX+
6
Green
Net - RX-
7
---
---
P3
Cable:
Wire Application
Wire
Color
Description
Beeper
1
Pink
Beeper Output 5V/100mA, Low
LED
2
Yellow
Red LED Output 5V/20mA, Max
3
Brown
Green LED Output 5V/20mA, Max
Door Output
4
Blue White Transistor Output Max. 12V/100mA
(Open Collector Active Low)
Wiegand
5
Thin Green Wiegand DAT: 0 Input
6
Thin Blue Wiegand DAT: 1 Input
WG Door Contact
7
Orange
Negative Trigger Input
WG Exit Switch
8
Purple
Negative Trigger Input
P2
Cable:
Use a screwdriver to screw the mounting plate to the wall.
Pull cables ends through the access hole in the mounting plate.
Attach ACC995-V2 to the mounting plate and install screws (supplied) into the holes at the
bottom with the allen key.
Apply power. LED (green) will light up with one beep.
Installation
ECL-ACC995-V2
