7
I
NSTALLING
Y
OUR
T
ELEPHONE
DESK INSTALLATION
To install as a desk telephone
, use the long modular line cord
provided and refer to the diagram.
•
On the bottom of the
telephone base
, locate
the modular jack inside the
cavity. Plug one end of the
line cord into the jack.
•
Route the cord as
shown
through the chan-
nel to the back of the tele-
phone base.
•
Plug the unattached end of the line cord
into the modular
wall jack.
WALL INSTALLATION
To install a wall telephone
, use the short modular line cord
provided and refer to the diagram.
•
On the bottom of the telephone base
, locate the modular
jack inside the cavity. Plug one end of the short line cord into
the jack.
•
While holding the telephone base close to the mount-
ing location
, plug the unattached end of the line cord into the
modular wall jack. Excess line cord must be folded into the
cavity.
•
Note the two mounting studs on the modular wall jack
.
Align the telephone so that the two mounting studs are inserted
into the two slotted holes in the telephone base. Slide the
telephone down until it is tightly seated.