Model 2500 TEL-FLASH Telephone (Ordering Code 2500**-VBA-20F)
With Optional Message Waiting Lamp (Ordering Code 2500**-VBA-27F)
F
EATURES
O
F
Y
OUR
T
ELEPHONE
The TEL-FLASH telephone is designed for use with modern PABXs,
hybrid communication systems, and central offices providing custom
calling features.
HANDSET
The handset receiver is compatible with magnetically-
coupled hearing aids.
PUSH-BUTTON DIAL
The push-button dial is used to dial numbers using
TONE dialing. You must have tone service for your telephone company
to use this telephone.
RINGER VOLUME CONTROL
The ringer volume control is used to set
ringing for high volume, low volume, or silence ringing. If the switch is
set to silence ringing, you will not hear the ringer when someone calls
you.
TEL-FLASH
The convenient FLASH button is used, rather than the
hookswitch, to access PBX features such as transfer, hold, and
conference.
MESSAGE WAITING LAMP
The optional message waiting lamp is used
in PABX applications to indicate that the station user should contact the
message center. The lamp operates with 90 VDC supplied by the
connected equipment.
M
AINTENANCE
I
NFORMATION
Treat your telephone with care
for trouble-free performance. Avoid
dropping the handset. Carefully place the handset on-hook after use.
Clean your telephone with a damp cloth
. Stains may be removed
with a mild soap. Do not use liquid or aerosol detergents or cleaning
agents.
Model 2554 TEL-FLASH Telephone (Ordering Code 2554**-VBA-20F)
With Optional Message Waiting Lamp (Ordering Code 2554**-VBA-27F)
U
SING
Y
OUR
T
ELEPHONE
MAKING AND ANSWERING CALLS
Lift the handset to receive dial tone for making a call or to answer
an incoming call. You can end a call by placing the handset on-
hook.
SENDING A FLASH
Use The Flash Button For Features Access.
Use The Hookswitch Plunger For Positive Disconnect.
To signal your telephone system during a call, press the
FLASH button. The results of a flash signal depend on the
services you have available from the telephone company.
For example, if you have "second-call waiting" provided by
your central office, operating the FLASH button puts the first
call on hold and connects you to the waiting call.
Refer to the user instructions included with your PABX. When
a "hookswitch flash" is indicated, use the FLASH button. Do
NOT use the hookswitch as this will disconnect you.
To disconnect after transferring or completing a call, simply
hang up your handset. If you want to make another call
without hanging up, press and release the hookswitch
plunger; wait for dial tone; and dial the number. Operating the
hookswitch plunger will disconnect you for a minimum of 1.2
seconds. Remember that a new dial tone will be slightly
delayed when you use this procedure.
ANSWERING A MESSAGE WAITING SIGNAL
You will be signaled by a flashing message waiting
lamp
when you have a message waiting. Operation of the
message center will, of course, depend on your telephone
system. Usually, you can dial the number for the message
center, retrieve your message, and the message center
attendant will turn off the message waiting lamp on your
telephone.
R
EPAIR
O
F
Y
OUR
T
ELEPHONE
DO NOT ATTEMPT TO REPAIR THE TELEPHONE YOUR-
SELF
. Telephones manufactured by CORTELCO must be
returned to us for repair.
You can return your telephone to CORTELCO
for repair
or replacement in accordance with our LIMITED WARRANTY.
DATE-OF-PURCHASE
CORTELCO warrants telephones
against defects in material and workmanship in accordance
with our LIMITED WARRANTY. If your telephone is returned
for repair, include a copy of your sales receipt containing the
date-of-purchase. DO NOT INCLUDE THE ORIGINAL SALES
RECEIPT.
If date-of-purchase is not included
, the factory date
printed on the label on the bottom of your telephone will be
used as the date-of-purchase. The factory date allows six
months for distribution and sale of the telephone.
If you return your telephone for repair
, the warranty
period is not extended. The original date-of-purchase
continues to apply to your warranty.
OUT-OF-WARRANTY REPAIR
We will repair this telephone
for a nominal fee after the LIMITED WARRANTY has expired
if you send it to us in a complete and undamaged condition.
The repaired telephone will be shipped to you C.O.D., freight
collect.
FOREIGN ATTACHMENTS
Remove all attached devices,
such as adapter plugs or long cords, from your telephone
before returning for repair. We do not assume responsibility
for repair or return of attachments. Check our LIMITED
WARRANTY.
RETURN-FOR-REPAIR PACKAGING
If you are returning a
telephone to us for repair, package it carefully, preferably in
the original carton. Be sure to include your return address, a
copy of the sales receipt showing date-of-purchase, and a
note describing the problem you have with your telephone.
Shipping must be prepaid. If the telephone is in warranty, it will
be repaired or replaced, at our option, at no cost to you, and
it will be returned shipping prepaid.
Ship telephones (shipping prepaid) to:
CORTELCO REPAIR CENTER
1703 SAWYER ROAD
CORINTH, MS 38834