I
NSTALLING
Y
OUR
T
ELEPHONE
DESK INSTALLATION
To install as a desk telephone
, refer to the diagram.
•
Insert the baseplate mounting
posts
into the mounting holes and
locking slot on the housing.
•
Connect
the line cord into the
jack on the back of the phone.
•
Plug the line cord
into the
jack and route the free end down
through the channel to the baseplate.
•
Plug the unattached end of the
line cord
into the modular wall jack.
WALL INSTALLATION
To install a wall telephone
, refer to the diagram.
•
Insert
the baseplate
mounting posts and latch into the
mounting holes and locking slot.
•
Plug
the line cord into
the wallplate.
•
Slip
the eyelets of the
baseplate down onto the wallplate
posts in
a downward direction.
•
Adjust
the wall mount
clip, located on the face of the
housing, by lifting up the clip and
rotating it 180 degrees.
Complete the Desk/Wall mounting by installing the handset
and handset cord.
CHECK FOR DIAL TONE
Lift the handset
and listen for dial tone.
1)
When you hear dial tone
, your telephone is ready to use.
2)
If you do not hear dial tone
, refer to the Telephone Service
Problems part of your manual.
10
