to achieve different levels. The volume remains the same between calls. It does not
return to a nominal level.
REDIAL BUTTON
1.
To redial one of the last 10 numbers dialed, press the
REDIAL
button. Thedis-
play will show the last number dialed. To scroll through the last 10 numbers,
press the
REVIEW UP
(
) button or
REVIEW DOWN
(
)
button.
2.
After the desired number is selected, dial the number by pressing
REDIAL
again, lifting the handset, pressing the
SPEAKERPHONE
button or pressing the
DIAL
button.
3.
The last number called (32 digits maximum) will automatically be redialed.
PAUSE BUTTON
The
PAUSE
button allows you to insert a 3.6-second pause in the dialing sequence. This
is particularly useful if you are connected to a PABX system where you must dial an
access code (usually the number 9) to obtain an outside line.
1.
Press the
PAUSE
button and release at any point in the dialing sequence
where a pause is desired.
2.
The
PAUSE
button can be pressed more than once to create a longer pause.
HOLD BUTTON
1.
To place a call on hold, press the
HOLD
button and hang up the handset. The
HOLD
Indicator will light up and remain lighted until you resume your conversation.
2.
To resume your conversation, lift the handset or that of any extension phone on the
same line or press and release
SPEAKERPHONE
. The
HOLD
indicator will go out
and your call can continue.
FLASH BUTTON
This telephone provides a line break signal for accessing PABX service or for conve-
nient use of Call Waiting from your local telephone company. If you have Call Waiting
service, you can use the Call Waiting function per the following instructions.
1.
While having a conversation, another party calls and you hear a tone.
2.
Press the
FLASH
button once and release. The first conversation is placed on hold
and the second call can be answered.
3.
Press
FLASH
button again and release. You may speak to the first caller again and
the second call is placed on hold.
8
