•
To store in a keypad memory location - Press one of the keypad buttons (l,
2, 3, or 0).
5.
Use pull out memory index to write in name and the memory button where it is
stored.
To Dial A Phone Number In Memory
1.
Lift the handset and wait for a dial tone.
2.
Press any memory location.
•
To dial an auto memory button (located on right-band side of base) - Press
the desired auto memory button (1, 2, 3.... or 10).
•
To dial a keypad memory location - press the
MEM DIAL
button first, and then
the desired keypad button (1, 2, 3.... or 0).
3.
The number will be displayed and dialed automatically.
VOLUME BUTTON
A built-in amplifier feature allows you to increase the listening volume in the receiver of
the handset when speaking with your party. When needed, press the
VOLUME
button
to achieve three different levels. The volume will go back to default after you hang up
the handset.
REDIAL BUTTON
1.
If the number you dialed is busy, or you want to call the last number dialed again,
lift the handset, or press and release the hookswitch for a new dial tone.
2.
Press
REDIAL
. The number will appear on the display window.
3.
The last number called (31 digits maximum) will automatically be redialed.
PAUSE BUTTON
The
PAUSE
button allows you to insert a 3.6-second pause in the dialing sequence. This
is particularly useful if you are connected to a PABX system where you must dial an
access code (usually the number 9) to obtain an outside line.
1.
Press the
PAUSE
button once and release at any point in the dialing sequence
where a pause is desired.
2.
The
PAUSE
button can be pressed more than once to create a longer pause.
10
