LOCATION OF CONTROLS
625015-TP2-27F
OWNER’S MANUAL
AND
OPERATING INSTRUCTIONS
FEATURES:
• 80 Name and Number Caller ID with Call Waiting
• 3 One-Touch Memory
• 10 Two-Touch Memory
• Multi Languages - English/French/Spanish
• Displays Time and Date of Each Call
• Desk/Wall Mountable
• Flashing Visual Ring Indicator
• New Call Indication
• FSK Message Waiting
• Real Time Clock
• Call Duration
• Tone/Pulse Dialing
• Electronic Ringer - Hi/Lo/Off Switch
• Handset Volume Control (NOR./HI)
• Low Battery Indicator
• Mute, Pause, Redial and Flash
• Available Color: White
INSTALLATION
Install 4 AA 1.5V batteries into the battery compartment on the bottom of the 6250. (Please
note the correct po and -. Batteries not included). Plug one end of the coil cord into the
handset and the other end into the jack on the telephone base. Use the new line cord to
connect the Phone jack of your new phone to the modular wall jack.
SETTING UP
After the installation is complete, press [DIAL] for 3 seconds, the LCD will display
‘OPTIONS MENU’, then press [s] or [t] to select the setting including Set Language, Local
Area Code, Set Time/Date, Set Flash Time, LCD Contrast and Exit Options:
A. Set Language
-
Press [DIAL] to enter the Language setting.
-
Use [
▲
] or [
▼
] to select the desired language (ENGLISH=English, ESPANOL=Spanish
and FRANCAIS=French).
- Press [DIAL] to confirm.
B. Local Area Code
- After setting the language, press [s] to select Local Area Code.
- Press [DIAL] to enter the area code setting.
- Press [s] or [t] to select the first digit of area code.
- Press [DIAL] to confirm the first digit.
- Use the same method to enter the remaining digits.
- Press [DIAL] to confirm the Local Area Code.
C. Date and Time
- After setting the area code, press [
▲
] to select Date and Time.
- Press [DIAL] to enter the date and time setting.
- Press [
▲
] or [
▼
] to set the hour, minute, AM/PM, month and day in the top left
hand corner.
- Press [DIAL] to confirm.
D. Set Flash Time
- After setting date and time, press [
▲
] to select Set Flash Time.
- Press [DIAL] to enter the flash time setting.
- Press [
▲
] or [
▼
] to select the flash time - 100ms 300ms or 600ms.
- Press [DIAL] to confirm.
E. LCD Contrast
- After setting flash time, press [
▲
] to select LCD Contrast.
- Press [DIAL] to enter LCD contrast setting.
- Press [
▲
] or [
▼
] to select the LCD contrast level from 1 to 8.
- Press [DIAL] to confirm.
F. Exit Option
- After setting LCD contrast, press [
▲
] to select Exit Option
.
- Press [DIAL] to exit the menu setting.
Note: While in the setup menu, the phone will return to idle state after approximately 3
seconds if a key is not pressed. To re-enter the setup menu, press and hold [DIAL] for 3
seconds to review or reprogram the Language, Local Area Code, Date/Time, Flash Time
and LCD Contrast.
TELEPHONE OPERATION
Note: The feature buttons will not operate without battery power. Please follow the
installation procedures before operating the telephone.
Placing a phone call
1. Select the desired dialing mode using the Tone/Pulse switch.
2. Lift the handset and wait for a dial tone.
3. Dial the telephone number you wish to call. The number will appear in the display.
Hang up the handset when you finish your call.
Note: The handset volume switch allows you to adjust the volume level to Nor./HI.
The switch is located on the right side of the handset.
Receiving a phone call
1. Be sure that the RINGER switch is set to the LO or HI position.
2. When the phone rings and the caller’s information shows on the display window, lift the
handset to begin your conversation. To insure you receive the CID information correctly,
do not answer until the CID Data is observed in the display.
3. Set the RINGER switch to OFF position when you do not want to be interrupted by the
telephone ringing. Remember to set the ringer switch back to LO or HI when you want
to receive calls again.
CALLER ID - RECEIVING CALLS
1. When the telephone is not in use and a new call is received, the display will show the
NEW symbol, the phone number, the caller’s name, and time/date of the call.
2. After approximately 10 seconds with no activity, the display will default to the Stand-By
screen and remain on the Stand-By screen until another call is received or a button is
pressed. The Stand-By screen displays the total number of calls stored, new calls that
have not been reviewed, and date/time.
REVIEWING THE CALLER ID LIST
1. Press the review up [
▲
] or the review down [
▼
] button to review the incoming
stored calls.
2. The NEW symbol attached to each call will be removed after you review the call.
3. If new calls are still displayed on the Stand-By screen, then there are new calls
that have not been reviewed.
4. When you have reached the end of the call records, the display will indicate END
OF LIST confirming there are no more stored calls.
DELETING CALL RECORDS
1. To delete an individual call: Review calls and select the desired entry to delete.
Press DEL once and “Delete Call” appears in the display, press DEL again to
confirm deletion.
2. To delete all calls: While reviewing calls press and hold DEL for 3 seconds. “DEL ALL
CALLS” appears in the display. Press DEL again to confirm deletion of all Caller ID
records.
Note: If the Call Record list is full, then the oldest record will automatically be deleted when
a new call is received.
CALLBACK
When reviewing received calls, there are two ways to dial the telephone numbers shown
on the display by pressing DIAL.
1. With the handset in its cradle (on-hook), press DIAL. [PICKUP OR ADJ] will appear in
the display. If the handset is picked up, then the number is automatically dialed. If you
choose to adjust (ADJ) the number, then press DIAL while the handset is still in the
cradle. Press DIAL once to add the area code to a 7 digit number. Press DIAL again
to add a “1” to a 10 digit number. Pressing DIAL again will change the number to a 7
digit number. At any time, the number will be dialed by lifting the handset.
2. If you pick up the handset, review the calls, and press DIAL, the displayed number will
be dialed immediately.
CALL WAITING DISPLAY
Call Waiting Caller ID not only tells you there is another call waiting, but lets you know who
the caller is before you answer it. The call waiting information will be shown on the unit’s
display.
The CALL WAITING (CW) symbol will flash along with the telephone number and name of
the person who is on call waiting. Press the FLASH button to put the existing call on hold
and answer the new call.
The Call Waiting Caller ID info will be stored for future reference whether the call is
answered or not.
Note: Make sure you have subscribed to both Call Waiting Caller ID and Caller ID service
from your local telephone company. If you only have Caller ID service, the unit works for
Caller ID only.
RINGER HI/LO/OFF SWITCH
-
Slide the [RINGER] switch to ‘HI’ position or ‘LO’ position to turn the ringer on.
‘HI’ for high volume and ‘LO’ for low volume.
-
Slide the [RINGER] switch to ‘OFF’ position to turn the ringer off. The ringer will
not be activated by any incoming calls.
HANDSET VOLUME CONTROL (NOR/HI)
Slide the [VOLUME] switch to ‘HI’ position for high handset volume and ‘Nor’ for normal
handset volume.
TONE DIALING (T/P OR TONE/PULSE SWITCH)
1. If your telephone line accepts a touch-tone dialing, set the [T-P] switch to the ‘T’
(Tone) position.
2. If your telephone line requires a rotary (pulse) dialing, set the [T-P] switch to the
“P” (Pulse) position.
3. If you are using Pulse dialing and you want to make a tone entry after pulse
dialing, pres the * button once, then dial the number.
ONE-TOUCH MEMORY
To Store A Number in Memory:
1. Pick up the handset.
2. Press [STORE] once and “Store Number” will appear on the display.
3. Dial the telephone number (22 digits maximum) to store in memory.
4. Press the desired memory location – M1, M2, or M3 to store the number in memory.
To Dial a Number in Memory:
1. Lift the handset and wait for a dial tone.
2. Press the desired memory location – M1, M2, or M3.
3. The number will be displayed and dialed automatically.
STORE
M1
MUTE
PAUSE
FLASH
REDIAL
1
2
3
4
5
6
7
8
9
0
#
ABC
JKL
TUV
GHI
PORS
OPER
DEF
MNO
WXYZ
MEMO
M2
M3
Speaker
Memo Button
Pause Button
Redial Button
Hook Switch
Store Button
Keypad
Mute Button
Flash Button
Microphone
One-touch Memory Button
(M1-M3)
Tone / Pulse Switch
Scroll Up Button
Del Button
Scroll Down Button
Dial Button
Caller ID LCD Screen
Receiver
NOR./HI
Switch
DIAL
Del
Ringer indicator
REVIEW
OPEN
OPEN
OPEN
OPEN
Ringer Hi / Lo / Off
Switch
Buzzer
