9
I
NSTALLING
Y
OUR
T
ELEPHONE
•
Adjust
the wall mount clip, located on the face of the housing,
by lifting up the clip and rotating it 180 degrees.
Complete the Desk/Wall mounting by installing the handset and
handset cord.
CHECK FOR DIAL TONE
Lift the handset
and listen for dial tone.
•
When you hear dial tone
, your telephone is ready to use.
•
If you do not hear dial tone
, refer to the Telephone Service
Problems part of your manual.
B
EFORE
U
SING
Y
OUR
T
ELEPHONE
1.
Set the ringer volume control
. If the control is set to OFF,
you will not hear the ringer when someone calls you.
2.
Your telephone has a TONE-PULSE switch
. Set the switch
to match the dialing service from the telephone company.
•
If you have pulse service
, set the Tone-Pulse switch to
PULSE.
•
If you set the switch for TONE service
, you must have
TONE service or you cannot dial.
•
If you set the switch for PULSE service and you have
TONE service
, you can dial numbers, but you cannot use
distant services, such as bank-by-phone, unless you press
the TONE button.
M
AINTENANCE
I
NFORMATION
Treat your telephone with care
for trouble-free performance.
Avoid dropping the handset. Carefully place the handset on-hook
after use.
Clean your telephone with a damp cloth
. Stains may be
removed with a mild soap. Do not use liquid or aerosol detergents
or cleaning agents.