14
2740 User Manual Version 1.11
b.
Press the soft key under
DOWN ARROW
repeatedly until “
Advanced Setting
” appears in
the display.
c.
Press the soft key under
ENTER
.
d.
Press the
DOWN ARROW
repeatedly until “
Tone/Pulse
” appears in the display. The display
will show the current tone/pulse setting.
e.
Press the soft key under
CHANGE
repeatedly, to select either
TONE
or
PULSE
dialing.
f.
Press
MENU
to exit.
Note:
If the system is set to Pulse Dialing, press the * button to change the dialing mode temporarily to
tone during a call. This can be used to access services which require tone dialing. Dialing mode will
revert to pulse when the call ends.
2.11
Area Codes
The 2740 can accept three sets of Area Codes.
2.11.1
Home Area Code
This is the area code for the area where the 2740 is located. Only one Home Area Code may be
entered. After the Home Area Code is entered, only seven digits will be displayed when a call is
received from within the Home Area Code. Also, only seven digits will be dialed when
REDIAL
is
pressed.
2.11.2
Local Area Codes
These are area codes that require the area code plus seven digits to be dialed. A “1” is not dialed for
these area codes.
2.11.3
1 Plus 7
These area codes are for calls that require “1” plus the seven digits to be dialed. Up to six
1 Plus 7
area codes may be entered.
2.11.4
To enter area codes
a.
Press
MENU
. The display will read “
Phone Setting
”
b.
Press the soft key under
ENTER
c.
Press
DOWN ARROW
until “
Area Codes
” appears in the display
d.
Press the soft key under
ENTER
. The HOME area code setting will be displayed.
e.
Press the soft key under
CHANGE
to change this setting
f.
Press
DOWN ARROW
to view the LOCAL setting
g.
Press the soft key under
CHANGE
to change this setting
h.
Press
DOWN ARROW
to view the 1 PLUS 7 area code settings.
i.
Press the soft key under
CHANGE
to change this setting
3.
MEMORY SETTINGS
3.1
Memory Features
The 2740 can store up to 45 numbers in its memory. Five numbers can be stored into one-button
Memory locations which are dialed by pressing a memory button. Forty numbers can be stored into
Personal Directory locations, which are dialed by pressing”#” followed by the arrow buttons.