Cortelco 1201 Owner'S Instruction Manual Download Page 4

This switch is located on the bottom of the telephone. For Tone Dialing, set
the switch to the T position. For Pulse Dialing, set the switch to the P position.

This feature allows you to redial the last phone number dialed.
a. Lift handset.
b. Press

.

Ringer Volume Switch - There are 3 ringer levels (

,

, and

). These may

be selected by this switch on the bottom of the telephone.

1. Dial mode switch

Redial function

3. Mute function

4. Flash button

Flash time switch

6. Ringer volume switch

REDIAL

HI LO

OFF

2.

5.

This feature allows you to turn off your telephone's microphone so that the
other party cannot hear you.

Press FLASH instead of pressing the hook switch to activate services such as
Call Waiting or 3-Way Calling, or to activate certain PBX or Centrex features.
You may be required to press other buttons before or after you press

.

Refer to the custom calling instructions provided by your local telephone
company or to the operating instructions provided with your PBX.

The initial factory-set flash length is 600 milliseconds, which is appropriate for
most installations. However, two other Flash times are available. Use this
switch on the bottom of the phone to select 100, 300 or 600 mSec.

FLASH

3

OPERATIONS

2

Press the

or

buttons to adjust the receive volume during a

conversation. There are 4 levels.

There are 3 memory locations (

~

).

1. Lift the handset.
2. Press

.

3. Dial the number to be stored (Press

to insert a pause).

4. Press

.

5. Press the desired Memory Button (

~

).

1. Lift the handset.
2. Press the desired Memory Button (

~

).

1. Lift the handset.
2. Press

.

3. Dial the number to be stored (Press

to insert a pause).

4. Press

.

5. Press the desired Memory Button (

).

1. Lift the handset.
2. Press

.

3. Press the desired Memory Button (

).

7.

8. One-touch memory

9. Two-touch memory

VOL.+

VOL.-

M1 M3

A. To store a number to memory

STORE/SET

PAUSE

STORE/SET

M1 M3

B.

M1 M3

A. To store a number to memory

STORE/SET

PAUSE

STORE/SET

0~9

B. To dial the number in memory

AUTO

0~9

Volume setting

To dial a number stored in memory

There are 10 two-touch memory locations.

4

Summary of Contents for 1201

Page 1: ... fire or electrical shock Take the phone to a qualified technician when it requires repair work or service To reduce the risk of electrical shock do not disassemble the telephone Opening or removing covers can expose you to dangerous voltages or other risks Incorrect re assembly can cause electrical shock during subsequent use Avoid using the telephone during an electrical storm There can be a sli...

Page 2: ...SET AUTO MUTE HOLD REDIAL WALL INSTALLATION 3 Desk tab position Wall mount tab position diagram 1 Slide the handset tab out and rotate it 180 degrees so that the hook points up This will hold the handset in the cradle when the phone is mounted on the wall Remove the desk stand from the phone base see diagram 2 Mount the phone on a standard telephone wall jack 1 2 3 diagram 2 ...

Page 3: ...connected to the line HOLD 11 12 Phone resetting 1 Lift the handset 2 Dial 0000 3 Hang up the handset Pressing this button will insert a 3 second pause in the dialing sequence This is intended to be used with memory dialing Resetting the phone will erase all memory dial numbers and the redial memory Ringer volume switch Flash time switch Dialing mode switch ...

Page 4: ...any or to the operating instructions provided with your PBX The initial factory set flash length is 600 milliseconds which is appropriate for most installations However two other Flash times are available Use this switch on the bottom of the phone to select 100 300 or 600 mSec FLASH 3 OPERATIONS 2 Press the or buttons to adjust the receive volume during a conversation There are 4 levels There are ...

Reviews: