Corsynth C110 2044 VCF User Manual Download Page 2

C110 2044 VCF

1

HTTP://WWW.CORSYNTH.COM

 

The C110 2044 VCF is a four pole low pass filter based in 

the classical filter SSM2044. This filter chip is responsible for 

the sound of some well known polysynths from the 80s like the 

Korg Mono / Poly , Korg Polysix , Korg Trident, PPG Wave 2.2 

and 2.3 ,EMU Emulator I, Kawai K3, Sx-240 , Siel Opera 6 ....

    The C110 is designed using the new reissued SSI2144 IC. It is 

an updated version of the original SSM2044 with  lower noise, 

better  control  feedthrough  but  preserving  all  the  sonic 

characteristics of the original design.

Like many filters the SSM2044 suffer from gain loss when the 

resonance  is  increased    ,  the  C110  includes  an  especially 

designed circuit co correct that. This circuit can be activated or 

deactivated  on  the  front  panel  allowing  the  user  to  select 

between the traditional response and the gain compensated 

response.

The C110 has temperature compensated voltage control and it 

will oscillate at high resonances. It can be used as an oscillator 

over 3-4 octaves.

The C110 main characteristics are :

- Four pole response ( 24db/octave )

- Gain compensation circuit

- Three modulation inputs one with an attenuverter

- Voltage controlled resonance

- Temperature compensated

- One audio input

The  FM2  input  has  a  0,66 V/Octave  response  expanding  the 

modulation range to 7,5 octaves using the typical 5V envelope.

C110 2044 VCF

Summary of Contents for C110 2044 VCF








Reviews: