Corsynth C107, User Manual, Page: 4 / 8

C107 Quad Linear VCA / VC MIxer
3
HTTP://WWW.CORSYNTH.COM
CONTROL DESCRIPTION
GAIN
This potentiometer sets the initial gain of the VCA. If
there is not CV signal connected to the VCA :
0 = The VCA is closed and there is no signal at the output.
1 = The output signal has the same level as the input.
CV IN / CV LEVEL
Control voltage input for the VCA gain. The amount of CV
signal is set by the CV LEVEL potentiometer. The VCA
total gain is the result of adding the amount of CV signal
and the initial gain set by the GAIN potentiometer.
Using a 5V CV signal :
- GAIN 0 = VCA gain is 1
- GAIN 1 = VCA gain is 2 ( doubles the signal amplitude )
This input accepts positive an negative signals.
GAIN
0 1
VCA IN
CV LEVEL
MIN MAX
CV IN
VCA IN
VCA signal input. This input can be used with audio and
control signals.
THESE CONTROLS ARE THE SAME FOR ALL VCAs
1+2
1+2
VCA 1 + VCA2 mix output.