Corsano CardioWatch 287, Instruction Manual

Page: 5 / 49

As of 2021-11-23
Ι Revision status: 9
5
3.4 Handling and Usage
•
Stop using this bracelet and consult with your physician if you experience skin
irritation or discomfort.
•
Consult with your physician before using this bracelet on an arm where intravascular
access or therapy, or an arterio-venous (A-V) shunt, is present because of temporary
interference to blood flow, which could result in injury.
•
Consult with your physician before using this bracelet if you have severe blood flow
problems or blood disorders.
•
DO NOT use this bracelet for any purpose other than measuring heartbeats.
•
During measurement, make sure that no mobile device or any other electrical device
that emits electromagnetic fields is within 12 inches (30 cm) of this bracelet. This may
result in incorrect operation of the bracelet and/or cause an inaccurate reading.
•
DO NOT disassemble or attempt to repair this bracelet or other components. This
may cause an inaccurate reading.
•
DO NOT drop or subject this bracelet to strong shocks or vibrations.
•
DO NOT use this bracelet with other medical electrical (ME) equipment
simultaneously. This may result in incorrect operation of the bracelet and/or cause an
inaccurate reading.
•
Ensure that this bracelet has acclimated to room temperature before taking a
measurement. Taking a measurement after an extreme temperature change could
lead to an inaccurate reading.
•
Ensure the bracelet is well adjusted on the wrist to have the best performance of the
heart rate sensor, and not too tight to avoid skin injuries
3.5 Charger Handling and Usage
•
USE the charger cable with a CE marked adapter with the following characteristics:
o
Input voltage: 100/240 V - 50hz 60hz
o
Output voltage: DC 5V (+-5%)
o
Maximum current: 500 mA
•
DO NOT use the charger if this bracelet or the charger cable is damaged. If this
bracelet or the cable is damaged, unplug the charger immediately.
•
Plug the charger into the appropriate USB outlet. DO NOT use in a multi-outlet plug.
•
NEVER plug in or unplug the charger from the electric outlet with wet hands.
•
DO NOT disassemble or attempt to repair the charger.