Corsair VENGEANCE K70 RGB, Manual

Page: 84 / 142

78
CO R S A I R V E N G E A N C E K 7 0 R G B K E Y B OA R D M A N U A L
Deleting a Light
In the lighting grid, right-click the marker, and then
click
Delete
�
Clearing a Light Section
If you have defined multiple markers for the wave,
and want to delete all the markers prior to or after a
specific marker, you can clear multiple lights at once�
• To clear all the lights to the right of a marker,
right-click the marker, and then click
Clear to right �
• To clear all the lights to the left of a marker, right-
click the marker, and then click
Clear to left �
Cloning an Start or End Light
You can clone the start or end point of a wave to the
opposite end, to help create continuity in color and
luminance for the start and end of the lighting effect�
• Right-click the marker you want to clone, and
then click
Clone to other end-point �
• In the lighting grid, a marker with the same color
and intensity will appear at the opposite end�
Note: This function is only available with the start
and end lights of a wave lighting effect�
LIGHTING OVERVIEW
(Continued)
Adjusting Lighting Brightness
In the Brightness field, click and drag the slider to
the brightness level you want, with 10 being the
brightest, and 0 being the dimmest�
Flipping a Lighting Effect
You can also flip a lighting effect horizontally,
effectively reversing the lighting�
• Beneath the lighting grid, click Flip.
Selecting a Color
LIGHTING
ASSIGNMENTS
PART ONE