©2010 Corsair Memory, Inc. All Rights Reserved. Document Number: 49-00087
FEATURES and TESTING GUIDE: October 13, 2010
Page 8 of 8
CWCH70 - Corsair Hydro Series H70
b.
Record the DeltaT and repeat the process for additional coolers. Measure
(Tambient), in situations where the room temperature is not well controlled.
c.
Compare the DeltaT relative to other coolers tested in the same manner, and at
similar room temperatures.
Performance
The following results are indicative of the level of performance that you should expect to see from
the Corsair Hydro Series H70 CPU cooler at full fan speeds. If your results differ significantly from
those shown in the graph below then please contact your local Corsair representative to discuss
the results before publishing your review.
The tests were performed in the manner described above. All data was gathered at an ambient
temp of 25 Degrees C, or roughly 77 Degrees F, with a minimum log time of 120 minutes per test.
The above are absolute temperatures logged using the manner described previously. The H50
deltaT was 60C, while the H70 deltaT was a much lower 46.7C. This difference of 13.3C is largest
at overclocked, fully loaded settings. At lower clock speeds and idle temps, the difference is less
pronounced.
Test system:
Intel Core i7-920 processor overclocked to 3.8GHz (20 x 190MHz, 1.34V vcore), Asus Rampage III Extreme Motherboard,
inside an Obsidian 800D case with default fan configuration.
50.00
55.00
60.00
65.00
70.00
75.00
80.00
85.00
90.00
H50
H70
CPU Temperature
H50
H70
