Corsair 28R Sailing Manual Download Page 44 | Manualshive

Page: 44 / 101

background image

42

|

Page

Copyright © 2014 by Corsair Marine International

OFFSHORE SAILING

All  Corsair  models  have  been  designed  strong  enough  for  heavy  weather  sailing,  the
C28,  C31,  C37  and  Cruze  970  have  now  crossed  both  the  Atlantic  and  Pacific  Oceans
many  times.  However,  it  should  be  noted  that  they  are  small  boats  for  such  long
offshore  passages,  and  should  only  be  undertaken  by  experienced  sailors  and  well
prepared vessels.

Due to the considerable wear and tear that can result from such voyages, and the many
unforeseen hazards, warranty coverage is not available for any boat undertaking any
passage offshore longer than 200 miles.

* * * * * * * * * * *

WARNING

* * * * * * * * * * * *

THE SAFETY OF ANY CORSAIR MODEL AT SEA CANNOT BE GUARANTEED AS OFFSHORE
SAILING CAN BE A HAZARDOUS UNDERTAKING, WITH MANY RISKS. NUMEROUS
FACTORS BEYOND THE CONTROL OF THE MANUFACTURER WILL AFFECT THE SAFETY OF
ANY OFFSHORE VOYAGE AND ANY OWNER TAKING A CORSAIR TRIMARAN OFFSHORE
MUST ACCEPT FULL RESPONSIBILITY FOR ANY RISKS INVOLVED.

It  is  not  within  the  scope  of  this  manual  to  go  into  all  the  necessary  equipment  for
offshore  sailing,  this  being  covered  by  many  readily  available  books,  and/or  offshore
safety regulations. Essential item are an under wing re-entry hatch, the optional Storm
jib,  and  a  properly  set  up

storm parachute anchor

. The parachute anchor is a recent

development for multihulls and offers a very comfortable and safe method for surviving
severe storms.

CAPSIZE

Capsize is always a possibility, even if a remote one, and should it ever occur, stay calm,
and make sure all crew are accounted for. Anyone inside can stay there, it being safe for
some time. There is no danger of sinking.

When sailing offshore the following items should always be stored in the safety
compartment (accessible from underneath if capsized), with lanyards attached, and in
watertight bags:

- EPIRB unit

- Cutting tools

- Extra wrenches & tools

- Bolt cutters

- Spare beam bolt wrench

- Ropes

- VHF hand held radio

- Pliers

- Copy of righting instructions

- Flares

Surge is the major enemy inside the boat, and the first priority should be to seal all
hatches, vents etc, and try to keep the boat dry as possible. Poptop will remain in place
as this will try to float upwards. Main battery switch should be turned off and all loose
objects stored in the cabin settees, these now being above water. Surge will otherwise

«
...
42
43
44
45
46
...
»

Summary of Contents for 28R






































































































Reviews:

No comments

Related manuals for 28R

Brand: Grand Pages: 17

Brand: 3D Tender Pages: 18

Brand: Hobie Pages: 52

Brand: Supra Pages: 92

Brand: Supra Pages: 88

RISING FLOW SLSUPB636

Brand: SereneLife Pages: 8

Brand: SKEETA FOILING CRAFT Pages: 32

Brand: SKEETA FOILING CRAFT Pages: 32

Brand: Malibu Boats Pages: 64

Brand: Malibu Boats Pages: 202

Brand: Ranger Tugs Pages: 36

Brand: Zodiac Pages: 24

Brand: Zodiac Pages: 270

FX140 WaveRunner 2002

Brand: Yamaha Pages: 136

Brand: Grady-White Boats Pages: 78

Brand: Volvo Penta Pages: 138

Caribbean V2 8802

Brand: Joysway Pages: 6

Brand: Cruisers Yachts Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands