background image

 

 

 Black Bull Manual 

13 

 

 

WARRANTY 

CORS-AIR  engines  are  manufactured  with  top-quality  material,  therefore 
warranty is valid also for their accessories. 

DURATION OF WARRANTY 

  1 YEAR beginning from the date of sell or exit from CORS-AIR 
  Warranty includes spare parts and labour, transport excluded. 

WARRANTY IS VOID IN THE FOLLOWING SITUATIONS: 

  Alterations to the engine not approved by CORS-AIR.  
  Wear&tear  of  components  of  the  engine  due  to  the  instructions  within 

the product manual not being adhered to.  

  Accidental falls, crash or dropping of the engine or its components.  
  Overheating  and  seizure  of  the  engine  due  to  prolonged  high  speed 

running  of  the  engine,  running  with  excessive  loads,  running  with 
inadequate loads, running with insufficient oil in the petrol (for a wrong 
tuning  of  the  carburettor)  or  running  with  petrol  only  (oil  mixture 
omitted).  

  The  presence  of  dirt,  sand  or  foreign  bodies  in  the  carburettor  of  the 

engine.  

  Corrosion through bad storage of the engine or inadequate preparation 

for storage of the  engine. 

  Running the engine without an air-filter fitted to the carburettor.  
  Miss-assembly  of  engine  parts  or  components  not  assembled  by 

CORS-AIR  but  by  the  manufacturer  of  the  paramotor  or  by  the  end 
user,  supplied  disassembled  for  packing  and  transport  purposes, 
included all electrical or electronic components including electric starter.  

  Corrosion of the engine or components emanating from stone chips or 

any  other    impact or abnormal stress damage.  

  Work other than the maintenance set out in the product manual having 

been  carried  out  on  the  engine  by  anyone  other  than  CORS-AIR  or 
official dealers. 

  Incidental or consequential loss or damage.  
  Service bulletins from CORS-AIR not having been adhered to.  
  Engine used for racing use. 

Summary of Contents for BLACK BULL





















Reviews: